Trained by SKC in airborne monitoring techniques
Vapour and Dust Monitoring
If dust or vapours are an issue in your workplace then you have a legal responsibility to ensure that the levels to which your employees are exposed do not exceed the working exposure limits and that exposure is minimised.
Use of personal protection equipment should only be considered after other possible control methods.
As part of your risk assessment under COSHH, airborne monitoring of dust or vapours may be required to establish the exposure levels your staff are experiencing.
Always consider monitoring dust or vapour levels before embarking on expensive engineering controls which may not be necessary if exposure levels are well within limits.
NWMS use sampling equipment from SKC and have been trained by SKC in airborne monitoring techniques.
All samples that we take are sent for analysis in a UKAS certified laboratory and our sampling comes complete with these results and a full written report with recommendations.
“Dear Adrian, We had an HSE inspection yesterday and got a clean bill of health. Well done, to Northwest Management Solutions.”
Ian Mawdsley, Director, Elm Construction, Rainhill
“For small businesses like ourselves, health and safety issues, as well as employment issues are a minefield. Northwest Management Solutions Ltd takes away an ever growing headache. An excellent service”
Mark Whittle, Managing Director, Kestrel Windows Ltd, Chorley
“NWMS have provided us with an excellent HSE advice and audit services over several years with site audit reports always providing clear, concise recommendations as to how to remedy any shortfalls in HSE Management. I would not hesitate to recommend NWMS to Contractors looking for flexible, cost effective yet comprehensive HSE Advisor services.”
Jez Seamans, Managing Director, LMR Drilling UK Ltd